A Brace of Bracing

About two and a half years ago we promoted Simpson Strong-tie's Wall Bracing Calculator.  A new contender has entered the ring, APA (the plywood people).  We played around with their new calculator and found it to be a little different than Simpson's.  For one, the walls are adjustable more on the fly.  With Simpson, you need to use their Java back button and re-enter inputs.  With APA you can see changes as you go.  The biggest difference is that you can enter each braced wall section and opening so that APA can calculate not only the total wall bracing needed, but each panel as qualifying or not.  Pretty slick.

To play around with it, go here.  You will need an account to access their website but it's totally worth it.

And make sure you save your work (as an XML file, very cool) before exporting to a pdf.  The pdf feature is temporarily broken.  *edit* PDF function fixed.  But the xml feature tells me that I could edit the hard data in a text editor, similar to a Google Earth kml file.  Take that, Simpson!

Unbuckling Your Walls

Pop Quiz:

Why does wall sheathing buckle?

If you answered something like studs at 24" o.c., I'm sorry to disappoint you.  The most common cause of wall sheathing buckling is because it wasn't properly gapped.  We've hounded on this before.  But now the APA has developed a mobile tool that will help educate builders on some of the most common building issues.

See this and many more tips at the APA website.  Tambien en español!

• Prevent Buckling with Proper Spacing includes spacing recommendations for APA Rated Sheathing, APA Rated Sturd-I-Floor®, and APA 303 Siding. (Form M300, now available in Spanish)
• Construct a Solid, Squeak-Free Floor System describes how to prevent floor complaints and callbacks with proper floor sheathing installation. (Form Q300, now available in Spanish)
• Minimize Nail Pops describes how to reduce nail pops through recommended fastener selection and installation. (Form S300, now available in Spanish)
• Storage and Handling of APA Trademarked Panels provides guidelines to help protect panels from damage in storage, during shipment, and on the job site. (Form U450)
• APA Panels for Soffit Applications provides information on recommended panels and spans for open and closed soffits. (Form N330)
• Finishing APA Rated Siding describes recommended finishes and application recommendations for APA Rated Siding. (Form Q350)
• Proper Storage and Handling of Glulam Beams provides recommendations for storage and handling of glulam beams. (Form R540)
• Minimize Glulam Checking Through Proper Storage and Handling provides tips for preventing glulam checking. (Form F455)
• Proper Installation of APA Rated Sheathing for Roof Applications provides step-by-step instructions for roof sheathing installation. (Form N335)
• Proper Selection and Installation of APA Plywood Underlayment includes information on selection, handling, installation and fastening APA Underlayment panels. (Form R340)

Raise Your Heels

The APA (those wood people again) have issued a report on raised heel (AKA energy) trusses.  Typical trusses do not allow full height insulation out to the outside edge of an outside wall.  This means that the thermal envelope of your house is compromised where the roof comes down to the wall.  This would be akin to the back of your neck where your coat doesn't quite reach up to nor does your wool hat reach down to.  So consider raised heel trusses to be a scarf for your home.

Builders harumph about several issues.  Mainly plywood and siding and the extra cost.  How much extra cost, Captain Pennypincher?  Yes, it does cost extra.  But could you perhaps use all those drops from your sheathing in that extra 8-12" space?  But the taller blocking is also a somewhat valid point

The report gives some simplified methods for securing the trusses without complicated blocking.  The report is applicable for trusses with a heel between 15-1/4" and 24"; using continuous plywood (CS) as a prescriptive shear bracing method; for homes in seismic zones A, B, and C; for homes with wind exposure of 110mph or less; a whole list of other fairly typical conditions.

In essence, plywood has been found to be adequate to replace blocking between the tall trusses for all but the top chord itself.  That is, rather than using stacked 2x12's (illegal anyway) or a truss company built blocking solution, the plywood can extend to the bottom edge of the top chord.  Typical 2x4 bird-blocking can be used on top of that.

Thankfully, you as a builder do not have to figure this all out.  Talk to your designer about simplified solutions for energy heel trusses.  Here at Istockhouseplans, we're always happy to help you get the most bang out of your buck.

See the full report here (an account or login may be required):

http://www.apawood.org/level_c.cfm?content=pub_searchresults&pK=Form%20SR-103&pF=Yes

Advanced Framing Techniques in Video

The APA (Y'know, the plywood people) recently unveiled a new video outlining advanced framing and how easy it is to achieve in your building.  If you're still building at 16" o.c. with redundant studs at corners, windows, and T-walls, see this video.  These techniques actually ask you to do LESS in your building while achieving cheaper costs, a more comfortable home, environmental friendliness.  If you still balk then I won't stop you from building substandard home.  But for the future of your income, please at least consider staging these techniques into your repertoire of framing practices.

By way of reminder, it's not the number of studs that keep your house from blowing down or siding from warping, it's the use of plywood gapped per manufacturer's specs that achieves strength and durability.